*UPDATE 27th January 2016. New firmware update – version 2.60 (in article) to 2.90. Notable additions: added a heart rate graph if you tap the heart rate display (nice); can now select type of activity (running, cardio, other); backlight adjustment.
*UPDATE 31st March 2016. New firmware update – version 3.10. Notable additions: screen lock; more accurate resting HR; 4 day weather forecast (tap on weather widget).
The vivoSmart HR is an activity tracker with smart watch aspirations. It uses Garmin’s new optical sensor to constantly measure your heart rate at your wrist, to provide both a resting heart rate measurement, as well as a read out for activities such as running.
Features
The vivoSmart HR has all the usual features of an activity tracker as well as a pressure sensor to more accurately measure stairs climbed, and a touch sensitive screen with selectable screens to display: clock, steps, stairs climbed, activity minutes (more later), calories, distance, music controls, weather, notifications from your smart phone and heart rate (together with average resting HR).
A single button open and closes the menu, and will also start and stop the timer for activities (i.e. running). A long press will turn the device off (and on) too – although I’m not sure how often you’d want to turn it off.
From the menu, you can start the timer for an activity, manually turn on sleep mode, check your alarm, configure Bluetooth, sync your data to Garmin Connect manually, track down your connected smartphone, view recent activities, configure settings and finally view system information like the current firmware version.
Let’s take a look at the 10 screens in turn starting from the clock and swiping up. Note that you could configure what screens are visible, and their order, from the Garmin app. You can also configure the default screen. Swiping down takes you to the last item – so the default is one swipe either way for steps or heart rate.
Clock
A simple, always on time display, with day and date (see photo at top of post).
Steps
Total steps with a target which will automatically adjust based on how active you are. This is a fairly mature technology now and easily accurate enough for its purpose.
Stairs climbed
Total stairs climbed with a target you can set in the Garmin app. This is actually based on height gained, so walking up a hill also counts. This uses the pressure sensor and seems fairly accurate.
Intensity minutes
The target here is 150 minutes of moderate exercise like brisk walking, or 75 minutes of intense exercise like running.
Calories
![Steps](https://thetechnologyman.com/wp-content/uploads/2016/01/steps-1024x576.jpg)
This includes both active calories and resting calories – that is calories you burn just being alive.
Distance
This is based on your steps and is usually pretty close to what I measure accurately by GPS (when walking / running – not cycling!).
Music controls
You can control your paired smartphone’s music player. This was a feature I was looking forward to, but for Apple devices at least, it only controls the Apple music app and nothing else. I use the Apple podcast app a lot when cycling and walking but these controls do nothing for that, or for the Deezer app for that matter. I really hope they fix this in a future firmware update.
Weather
Next up is weather, which the vivoactive HR grabs from your paired smartphone. In the UK, you have to put up with Fahrenheit unless you change your distance units to kilometres rather than miles. Something else I hope they’ll fix.
Notifications
All notifications you have set on your paired phone flash up on the display briefly. You can choose to read the message by tapping on it. This is a feature I find useful when cycling for instance, since my phone is usually not easily accessible. You’ll also see incoming calls which you can answer or reject.
You may want to configure what notifications are set on your phone, since everything is passed across. I was getting buzzed just to inform me that the an app had been updated!
Heart Rate
This is arguably the most interesting feature and something I was very keen to try out. An LED underneath the display constantly measures your heart rate and you’ll see two measurements: one for your current heart rate; and another showing your average resting heart rate. I like the idea of seeing my resting heart rate over time in the Garmin app, which is meant to provide a useful indication of my fitness.
The heart rate icon flashes when you swipe to this mode for a few seconds, until it obtains a reading.
Read on for discussion on the accuracy compared to my tried and tested Garmin chest strap paired with a Garmin Edge 810.
In use
Setup is very straightforward and relies firstly on installing the free Garmin Connect app on your smartphone. Bluetooth pairing is done through this app – not the usual way. The vivosmart HR maintains a Bluetooth connection to your phone, whether it’s in your pocket or watching a YouTube video. This allows it to grab notifications and weather information.
When you open the app, it performs a sync where it pulls across your activities, steps, sleep etc. The app is a goldmine of information, which can be configured to display exactly what you want. You can view steps over days or weeks; sleep activity; heart rate over time (including average resting heart rate) and information on recorded activities plus a lot more.
Build quality and comfort
Build quality is very good as I’ve come to expect from Garmin. The strap is comfortable, with fine enough adjustment to get an exact fit. You want a snug fit, above the wrist bone, so that the HR sensor makes good contact with the skin. I do find I tighten the strap slightly if I’m wanting to accurately measure HR, but I’m not certain it makes any difference!
A big selling point of the vivosmart HR, like most Garmin fitness gadgets, is that it’s waterproof. Lots of fitness gadgets surprisingly aren’t, including even the Apple Watch. The display does have a mind of its own under water though.
Record an activity
To record a specific activity like a run, you press the device button, and tap the running man. And then press the device button again to start the timer. That’s the only type of activity you can select, but theoretically this can be any activity.
A timer is started, and activity specific display screens (configurable under Run Options in the Garmin app) are displayed. By default these are: clock, distance, stopwatch, calories and heart rate. The heart rate measurement is more accurate in activity mode, with a measurement taken every second.
At the end of the activity, you press the device button again and tap to save or discard the activity. If saved the activity will, by default, be uploaded to Garmin Connect. Recent activities are also saved on the watch. I haven’t worked out how to manually upload an activity – so it’s best to just leave the auto-upload setting on.
It’s very disappointing that you can’t use GPS off your phone during an activity. I can’t see any reason why not, and can only guess it’s to make sure you look to Garmin’s GPS equipped gadgets for accurate tracking. The step based tracking is good enough for most people, but I do hope Garmin consider enabling this feature in a firmware update.
Battery life
You’d imagine with a constant Bluetooth connection to your smartphone, and an always on display, battery life wouldn’t be great. But while it’s not over a year like Garmin’s vivofit 2, you will get around 4 or 5 days use (including sleep), which isn’t bad.
However, since Garmin use a propriety connection for charging, it’s all too easy to completely run out of charge. You get a charge icon when battery is low, but this still only gives you around 8 hours to locate that charging cable (I’ve already been caught short once).
Sleep mode
![Sleep information in Connect app](https://thetechnologyman.com/wp-content/uploads/2016/01/connect-sleep.jpg)
Sleep mode is much improved on the vivosmart HR compared to the vivofit I tried a while back. It will automatically determine when you fall asleep and when you wake up, based on your activity, and I guess heart rate. It does a fairly good job, and I’m realising I need to get to bed earlier!
You’ll need to view your sleep stats off the Garmin app, which as well as showing your fall-asleep and wake-up times, also displays the amount of light and deep sleep you’ve had, along with your activity (which appears to be how it calculates deep sleep). I’m not really sure what you can actually garner from these graphs, but it’s still interesting to see!
Broadcasting heart rate via ANT+
This is a fantastic feature, which enables you to leave your heart rate strap behind – or save yourself £50 if you don’t already have one.
The vivosmart HR can broadcast your heart rate via the ANT+ protocol to one of the many gadgets that support this. It works perfectly with my Garmin Edge 810. To enable the feature, press the device button and go to Settings | Heart rate.
Find your phone
From the device menu, you can tap on the phone icon to locate your paired smartphone. This is well implemented and sends an audible alert from your phone and also shows a signal strength meter on the watch. This could be handy if you often misplace your smartphone.
Display, backlight and vibration alerts
The display is clear and you can switch the orientation in the Garmin app – I have it set vertically. The touch screen is responsive and works with gloves too. The backlight comes on whenever you touch the display, but only for a short time and there’s no way to alter this length of time.
There is a setting to turn the backlight on automatically when you rotate your wrist, but I couldn’t get this to work.
The backlight is fairly dim, and again there is not way to configure this. But it’s more than adequate.
The watch vibrates for move alerts, notifications, and when you reach your goals. There doesn’t seem to be any way to change when it vibrates, or its intensity. But I find the amount of vibrate just about right.
Optical heart rate monitor accuracy
![Optical HR sensor](https://thetechnologyman.com/wp-content/uploads/2016/01/resize-IMG_1465-1024x926.jpg)
My main attraction to the vivosmart HR was the optical HR monitor. So I was keen to see how it compared to my heart rate strap.
I started an activity on the vivosmart HR to provide a more accurate HR trace, and at the same time ran my Garmin Edge 810 connected to a Garmin heart rate strap. I then commenced a 2h 30m fairly taxing ride on my mountain bike.
![Garmin Edge 810 with heart rate chest strap](https://thetechnologyman.com/wp-content/uploads/2016/01/garmin-edge-hrm-1024x608.jpg)
I’ve plotted both against each other below:
![Accuracy of optical HR sensor in vivosmart HR versus Garmin heart rate strap with Garmin Edge 810 cycling computer](https://thetechnologyman.com/wp-content/uploads/2016/01/hrm-accuracy-vivosmart-strap.jpg)
They’re not exactly a perfect match, but both graphs follow similar peaks and troughs, albeit with different absolute values. The last 30 minutes of the ride, they are almost a perfect match. This last 30 minutes was my route home along a cycle path and road. From this graph, it seems the optical HR sensor, is not as fast to respond to fast changes in heart rate, common with mountain biking. This was confirmed with a fairly gentle ride into work, where both graphs were within 5bpm of each other. I’ve not been able to produce a graph of this unfortunately.
For the casual “athlete” like me, the results from the optical HR are easily good enough. The ability of the vivosmart HR to broadcast to an ANT+ device like my Garmin Edge 810, means for cycling to work for instance I probably won’t bother with the chest strap anymore. I like having information on my heart rate, since it does give a better picture of how hard you’ve actually worked.
For longer rides, where I look down at the Edge for my HR zone for instance, I don’t think I could completely rely on the optical HR sensor just yet. I’ll test further, and update this article accordingly.
Conclusions
Pros
- Waterproof
- Responsive touch screen
- Optical HR is generally accurate enough
- Measures all day heart rate and trends in resting heart rate
- Garmin Connect app does a good job of combing data from multiple fitness gadgets
- Sleep monitoring is well implemented
- Notifications are a useful feature. Nice to also be able to read text messages
- Broadcasting HR via ANT+ is a great feature if you have any ANT+ fitness gadgets
Cons
- Can’t get weather in Celsius if you choose miles as units
- Proprietary charging cable required for charging
- No GPS built in or the ability to use paired smartphone’s GPS
- Accuracy of optical HR sensor can be erratic
- Not possible to connect to a heart rate chest strap
The vivoSmart HR is somewhere between an activity tracker and a smart watch. If it was able to use your phone’s GPS and added some activity modes (which could all be added by a firmware update), I’d have no hesitation recommending it. But even without these features, and considering it’s only a little more expensive than it little brother, the vivofit 2, I think it definitely deserves serious consideration.
If you have found this article useful please consider clicking on the link(s) below. You pay the exact same price and it’ll enable me to keep these articles coming!
Any questions, please ask away in the comments section below.
Really interesting review and I would like to buy one. However, the deal breaker for me is:
‘Can’t get weather in Celsius if you choose miles as units’.
Would you happen to know if a firmware update is planned to fix the problem?
I’d like to but ASAP.
Ragards.
Thanks for your comment. I did speak to Garmin about this – they weren’t forthcoming about any update – but I hope so.
What is the increasing arrow-like line that progresses up the left hand side of my display?
It’s the “move bar.” It fills up graduallywhile ur sitting still, then alerts u 2 move–if u have that feature enabled–then clears when u actually get up and around;) AD
How do turn on my vivismart+HR
Be sure your watch is charged. Put it in its cradle and then plug the USB end into your computer. While doing this, you might as well open Garmin Express/Garmin Connect to sync the latest downloads to your watch and to upload your latest activities. Once charged sufficiently for the screen to be visible, hold the Start/Stop button for a few seconds. The screen will change to “Lock Device / Power Off.” Press the right side (“Power Off”). Your watch is now asleep. To awaken, press Start/Stop for a few seconds. A triangle will appear and then will disappear to be replaced automatically with your regular screens. Your watch is on. [The only caveat that I know of is that your watch will use TrueUp if you wear a second Garmin while the HR+ is sleeping. If one of these watches is asleep for days, then TrueUp will set your sleep time as the time your watch was asleep, so it is possible for your statistics to show that you have been sleeping for several days! For all other data, TrueUp will be correct with two watches.]
Hi thanks for a great review really helpful,can you help . I don’t seem to be able to sync the weather on my device ,all else seems to be working ok .thanks
I’m having trouble with my weather app connection as well. The watch only displays weather when I turn on Garmin connect from my phone. The display was always there before, and I can’t figure out how to get that back.
I believe the Garmin Connect app needs to be running in the background or foreground on your device. This is the case for me on my iPhone anyway.
I agree that the weather app does not seem to work anymore. I do understand the part that Techsuppork says about Garmin Connect needs to be running. The part that Techsuppork and Garmin instruction manuals NEVER say is what weather app is best for Garmin to see and use. You know, step by step, such as (1) Load Yahoo! Weather app to your phone, (2) Open Garmin Connect on your phone, in cell-tower mode, (3) Put your phone in your pocket, (4) Go outside, (5) Scroll to your weather page.
Hi,
Thanks for the review, I’m currently deciding between vivosmart hr and vivoactive hr, but considering the price difference and the fact I own forerunner 910xt I think I’ll get vivosmart.
Regarding sensor accuracy – it looks from the pictures you are not wearing it correctly – should be few cm away from wrist bone, if you want accurate results. Might be just an angle of the pics though.
Thanks for your comment. I did always make sure it wasn’t over wrist bone. You just need to make sure the sensor is making contact with your skin. I adjusted the tightness of the strap too – but that didn’t make a lot of difference.
I agree that tightness is more important than location. The beats per minute (bpm) are inaccurate when the user is not warmed up. In fact, if you just start running, your displayed bpm will soar to heart-attack ranges. Instead, on a treadmill, start walking and within the first 1/4-mile adjust the speed upward to 3.5 MPH. Between 1/4-mile and 1/2-mile, adjust the speed to a fast walk (3.8 MPH). For the second 1/4-mile, run at a really low speed for you, such as 4.5-6.0 MPH. Look at the bpm to be sure the beats get into your two Intensity Minutes per minute range of “intense” exercise. Once your Garmin recognizes that your bpm are “intense” (about 92 bpm for me, an old man), then you can change the treadmill to any fast speed that you desire. The bpm remain accurate now that you have allowed the Garmin to observe your increasing pace for a few minutes of warmup.
The other thing that you might do, under the “run” settings of your watch, is set a customized alert that will warn you if your bpm reach heart-attack range. My setting is something like 39-142 bpm, as I never get into the 30s even when sleeping, and above 142 would stress me at 95% or so of MaxHR. Your range might also start at your dead bpm and go up to your just-shy-of-heart-attack bpm. With the alert set, you never have to monitor your Garmin while running.
Yikes, I have errors in my advice. Walk 1/8 mile at 3.5 MPH. Walk the next 1/8 mile at 3.8 MPH. Run the next 1/4 mile at an easy-for-you 4.5-6.0 MPH. After this 1/2 mile of warmup, your Garmin’s bpm will be accurate at any speed. Once you get to your running speed, don’t program your treadmill to make rapid changes of pace (ie, interval training) or again your watch might show a bpm that is dangerously high.
Hi, I just want to know how accurate it can estimate the distance, esp when running?
Thanx
Considering it’s not using GPS, I found the distance pretty accurate. You can also set stride length if you’re not finding the accuracy good enough..
If you want GPS get the HR+. You probably already knew that.
As John Phillips says, if you want accurate distances you need the GPS version. The GPS will determine your stride. If you walk or run in different locations (such as in a straight line on rubber, or in the woods on gravel), your Garmin stride will not be accurate for anything other than your averages. What you might do (what I do) is when running on a treadmill and Garmin is using your average stride, accept the treadmill’s distance as the accurate distance. Depending on whether your Garmin is showing more or less distance than your treadmill, you can either run a faster 1/4 mile or walk a 1/4 mile to bring the two distances into concordance. That is, set an alert so that Garmin chirps if your bpm get too high, then switch to a “distance” screen. Once every 3 to 5 miles, bring your Garmin and treadmill distances into concordance by doing the run/walk thing.
Of course, if you are running an event that earns a badge, go into manual mode and edit your final distance to what you know is correct (say 26.2 miles if your watch shows 26.1 miles, when you cut too many corners, as you might not earn a marathon badge for 26.1 miles).
Do you know if there is a way to add an activity other than “Run Cardio Other”?
Each time I do strength training I have to go into the Garmin Connect app and change “Other” to “Strength Training”. It would be nice if I could just choose “Strength Training” instead of “Other” from the vivosmart itself.
Thanks,
-Hal
Sorry – not that I know of.
Your Garmin watch can classify your exercise into hundreds of categories. However, except for run and walk, indoors and outdoors, you must do a manual edit to display whatever it was that you did. For example, you might fly a drone, jump with a wingsuit, ride a bike in rocks, or other activities for which Garmin has no sensors but does award badges. For badges dependent on distance, day, temperature, IM, your watch can use its internal sensors to award you the earned badge.
There is (now?) a “Statute UK” setting you can select in User Settings. If you select that in Garmin Connect and then an the vivosmart hr you go to settings and select miles instead of kilometer, then you should see celsius and miles.
-Hal
Or not. Hmm.
I notice while driving a truck a 18 kilometer journey I did 250 steeps plus a few hundred meters obviously I didn’t move from the seat ? Is there anything I can do to stop it from reading inaccurate ?.
No there isn’t – but these erroneous steps should make little difference to your overall activity measurements.
You can turn off your watch, put your watch in your pocket, or anything else that will keep your Garmin from monitoring your hand movements. I’m with Gidon, just enjoy the free steps that Garmin gives you.
Thanks for a great review!
It may be from a more recent update, but you can adjust the brightness of your backlighting, though not the length of time. It’s under Settings (cog wheel) and then Screen Preferences.
Thank you for your comment and pointing that feature out!
I like to see my steps while jogging/walking. But it doesn’t seem like I can do that with the vivosmart hr? Once I start an activity, is there a way to view steps? I can’t find that option, am I missing something?
I don’t think so – check under Run Options: http://goo.gl/edA8kt
No, you cannot see steps during an activity. However, you can see steps, Intensity Minutes, and floors on Garmin Connect. For instance, if you are on a treadmill, plug your charger cable into the treadmill, turn on Garmin Connect, place your cell phone on the rack, and start your activity. You can see two things on your watch (I choose heart rate and distance) and the steps, IM, floors on your cell phone. If you are outside without a place to hold your phone, then this option to place the cell phone on your treadmill’s rack is less useful.
I have bought this Watch. Following my feedback based on my experience.
Cons
1. It is waterproof but the over all accuracy drastically reduces while swimming. Possibly due to optical sensor.
2. Does not detect Breaststroke.
3. You have to install a separate app to monitor calorie intake.
Pros:
1. Measures Active Calorie measurement quite accurately in dry conditions.
2. Steps measurement is quite accurate.
3. If you are idle for few hours, then it vibrates and encourages to Move, that is quite helpful.
I agree that it’s not much use in the water – but at least it’s waterproof! And you can manually edit water based activities after the fact.
Great article and video. The stair meter is very inaccurate. Also not sure why the Bluetooth doesn’t stay connected. ( e.g phone notification). Otherwise very good product.
Thank you. The floors climbed is at least pretty consistent, if not entirely accurate.
Keep your cell phone close to your router if you want the Bluetooth not to disconnect.
The Vivosmart is like a traditional activity tracker but it’s smarter. It has smart Bluetooth notifications and a clearer display…although it lacks a GPS sensor. Also I was unable to pair my external heart rate sensor (ANT+) with this device. Maybe the latest version does but mine doesn’t. I have had no problems with the optical HR sensor but the chest HRM is more accurate.
The HRM is the most erratic at the beginning of an exercise. If you warm up for 5 minutes prior to starting an activity, the HRM is much more accurate.
Hi I’m in Australia and have my vivosmart HR set to metric but I’m still seeing the weather in Fahrenheit, is there anyway I can fix this?
Thanks Bron
Hi Bron
Try this and see if it helps: on your Vivosmarthr press the only physical button, which opens the main menu (you see the little man, the crescent moon, and an alarm clock) touch and scroll to the third screen.
You see a document folder, the settings icon, and the info icon. Touch on the Settings icon and scroll to Units, there you should be able to change from miles to kilometers, and that will change the F to C.
Gidon mentions this problem briefly under “weather” in his article.
Hope this helps, Bron.
Katherine
So I have switched my miles to km…. and every time I seem to have my watch sync it changes the setting back so in turn it changes my weather songs back to f instead of my preferred c. Very annoying that it doesn’t keep my setting any help to have it stay!
Carissa, that was helpful advice, I think that both the Watch and the App need to be identical. e.g. If your watch says Kilometres and the App has Miles set it will sync from the App overriding settings. I just checked them both and set to Kilometres which now displays constantly in ºC as opposed to ºF.
Still it would be much more beneficial to have Miles and ºC as a default. (Come On You UK Developers) :o)
Thanks to all your posts and have a Great Christmas!
Love
Uncle Garmin
Miles is a non-metric scale.
Celsius is a metric scale.
What you are suggesting does not make sense.
I think it would be better to include nautical miles and temperature in Kelvin.
Maybe the GPS models have that setting 😉
What are the numbers shown on the temperature screen? I assume the large one is current but what are the other two and is the the number down the bottom humidity or chance of rain? Thanks!
I received the Vivosmart HR for Christmas and found your review very clear and helpful in understanding the features and how to set up. My only complaint to Garmin is the Miles/Celcius choice set up. Hopefully this will be updated!
I’m not sure if there has been an update since your review but I’m pleased to say that the music buttons now work with the music on the IPhone 🙂
Thanks for the feedback :).
I totally agree with the above comments ,and hope that garmin will soon solve the f /c problem
Can the activity recorder be used effectively to time an activity such as running or swimming? I’m looking for something to replace my watch, but I want it to include a stopwatch. Would the activity recorder fulfill that? Does it record the exact time from the time you press the button to the time you press it again?
Yes, the Vivosmart HR+ is a stopwatch. It records the time between presses. I find the watch somewhat annoying in that sometimes it takes two presses to get it going with GPS. If you aren’t careful, you can press the start and believe you have the timer going, only to see in 5 minutes or so that the watch is about to go into battery-saver mode (ie, lose all data). So you can’t just take a jackrabbit start. You have to press the start and then look at your watch for a second to verify that it is recording an outdoor activity. The stop button always works with one press.
I have ‘Location’ turned on on my connected device but my Vivosmart HR still gives me Canadian weather, great for Canadians but I live in South Australia, Can you help please?
Informative
How do u clear a completed challenge.
If you are running Windows, you can use File Manager to delete any fit file. Just connect your watch to your computer by wire, and treat your watch as if it were a hard drive. Delete any file you don’t want to save.
It’s not vivoSmart HR, its vivow Smart HR, really too good, another useful product by Garmin
I must say it was hard to find your site in search results.
You write great content but you should rank your blog higher in search engines.
If you don’t know 2017 seo techniues search on youtube: how to rank a website
Marcel’s way
How do you turn the notifications so you can read them like everything else and how do you adjust stride length ?
Thanks
You may not want notifications, as these can shake your arm. They also drain your battery with the shaking. As for stride length, go to Garmin Connect. Click your watch icon in the top right of the screen. Edit your settings.
When I use the other or cardio options in activity mode it never records distance. Even it’s my field. Distance stays at 0. Help please. Thanks!
Really Nice Blog and very helpfull
Garmin GPS Support Number
How to use stopwatch.
And how to manage calls
One thing I want is a stopwatch timer. Is there one?
It is very good for your skin and tries it. Feel the goodness and get with the one you always wished to be.
I see you don’t monetize your blog, don’t waste your traffic, you can earn extra bucks every
month because you’ve got hi quality content.
If you want to know how to make extra money, search for: Ercannou’s
essential tools best adsense alternative
I have noticed you don’t monetize your page, don’t waste your traffic, you can earn extra cash
every month. You can use the best adsense alternative for any type of website (they
approve all websites), for more details simply search in gooogle:
boorfe’s tips monetize your website
Vivosmart is GPS device that developed by Garmin to detect your heartrate. Vivosmart also able to keep your activity data and provide it to computer. Your advance and wide information about vivosmart makes it more understandable for users. Keep sharing your more data and information about Garmin gadgets with users.
Maps are our restricted association with the course at which we voyaging. Garmin NUVI give short course to us towards our goal. Your blog have all the wide data that a man need to think about. Your blog contains actualities and legitimizes reasons. Continue sharing your more important websites on Garmin NUVI.
Hello, I enjoyed your video. My watch is in the lock mode and I do not want it auto locked?
I see all the directions to lock it, but not to unlock it? I do not like to tap twice everytime I use it. Would you have time to please let me know how to unlock it? Thank you in advance for your time.
Annie Blide
Press the Start button. Touch the wheel (systems), Screen Preferences, Auto Lock. You can toggle between Auto Lock being on or off.
very nice review. thank you for sharing .
Thanks Gidon. You have the best Vivosmart HR review that I have seen. Here are some clarifications:
1. Intensity Minutes earn double credit (2IM/minute) when the user is above Zone 2. If someone is walking on a treadmill and wants the maximum IM, either run occasionally or walk faster to get yourself into Zone 2.
(2) Weather does not seem to Bluetooth well. Is there a preferred Weather app on Play Store that the Garmin HR links with best?
(3) Notifications can definitely be too frequent. Go into Garmin Connect to turn off notifications. I only get the notification for when my bpm gets into heart-attack range.
(4) Activities do start with a press of the Start button, but it is easy to get this wrong. Be sure to bring up the Little Man and then the “Press to Start” screen. At this point, your activity is NOT started. Your watch will go into battery saver mode in about 5 minutes. You must press Start after seeing the Press to Start notification, and you must see the “Timer” screen next. If you see the Timer screen, you have correctly started your activity. That is, you need to press “Start” three times, once to bring up Little Man, once to see “Press to Start” for your selected activity, and once to see “Timer.”
(5) The battery life is not a problem if you leave your charging cable in your computer’s USB port. Whenever you sit at your computer, plug in your watch for a charge. If you are like me, you are always at your computer for a longer time than you anticipated.
(6) The Beats per Minute are slow to respond to changes in exercise level. Start with a 5-minute warmup. Get into at least Zone 2. Then start your activity. Your bpm will be accurate if you start from at least Zone 2.
(7) The Vivosmart HR+ is a great value, more so if purchased as a refurbished model (identical to new, with the same warranty). What you won’t get are VO2Max and Training Level that are found on more expensive watches. This means you can’t earn any Garmin badges based on improving your VO2Max or your Training Level. You do get many fitness metrics such as steps, distance, bpm, Intensity Minutes, floors, and training plans. The Vivosmart is a big improvement from my previous Vivofit 1, FR70, and the brick-thing that I would strap to my bicep.
Thanks for posting this information. I simply wish to allow you to understand that I simply consider your website and that i notice it terribly fascinating and informative. i am unable to wait to browse voluminous your posts.
Thanks for this brief yet descriptive article. Keep up the good work. We provide you with some of the steps that would help you in the process to Fix Incredimail Issues in Windows 10.
This is no less than what I was looking for. Thanks for sharing it with everyone. One can visit our website to get the knowledge about the process of Incredimail Download and Install.
Grab the latest Magellan GPS update from us. Visit our website or feel free to call us to get latest update now!
I am glad to have landed on this page and got to know so many new things. Thanks for sharing. Incredimail facilitates users with the easy sending and receiving of the mails.
The reviewer wants Garmin to use the GPS on cell phones, but, really, how many cell phones have GPS? I’d guess none, but perhaps some $1,000 phones have GPS. I don’t know why a cell phone would want GPS since a phone can triangulate from three cell towers.
in love with these features in thus price segment
-Sleek band is comfortable to wear all day, and the always-on display shows your stats, even in sunlight
-Displays steps, distance, calories, heart rate, floors climbed and activity intensity
-Receive text, call, email, calendar and social media alerts²
-Control your music and your VIRB® action camera (sold separately) all from your wrist
-Reminds you to stay active with move bar and vibration alert
Is your canon printer is offline mac? Want experts help? Then get in touch with us. Our professional techies will help you 24/7 so feel free to call us any time or to know more visit http://canonprinteroffline.com/why-my-canon-printer-is-offline-on-mac/
Facing a huge lose just because your computer is damaged or not working? Not able to use your time in earning because of your computer? Don’t Panic! Geeks for Tech understand your problem. Our expert technicians will make your old computer fixed. https://geeksfortech.net/
Are you looking for an expert to repair your Alexa device? Is it not able to respond to your voice command? No need to worry about that. Alexa Helpline can help you to make your device working properly.
you can call them 1-877-606-0409 at any time of the day via Garmin support number. Calling the Garmin customer support number is the best and reliable way to get effective solutions to your issues. We provides world class service for Garmin Gps Device. Get In Touch With Our Garmin Tech Support Experts and Get Instant Technical Support For Your Garmin Issues.